Product Detail
Product Tags
Function
2-Time Functions
-
-Cycler beginning with pulse
-
-Cycler beginning with pause
- Function choice is done by an external jumper of terminals S-A1.
- Time scale 0.1 s – 100 days devided into 10 time ranges:(0.1 s – 1 s / 1 s – 10 s / 0.1 min – 1 min / 1 min – 10 min / 0.1 hrs – 1 h / 1 hrs – 10 hrs / 0.1 day – 1 day /1 day – 10 days /3 days – 30 days / 10 days – 100 days).
- Relay status is indicated by LED.
- 1-MODULE, DIN rail mounting.
| Technical parameters |
WTT8-S1 |
WTT8-S2 |
| Function |
Asymmetric cycle time relay |
| Supply terminals |
A1-A2 |
| Voltage range |
AC/DC 12-240V(50-60Hz) |
| Burden |
AC 0.09-3VA/DC 0.05-1.7W |
| Voltage range |
AC 230V(50-60Hz) |
| Power input |
AC max.6VA/1.3W |
AC max.6VA/1.9W |
| Supply voltage tolerance |
-15%;+10% |
| Supply indication |
green LED |
| Time Ranges |
0.1s-10days |
| Time setting |
potentiometer |
| Time deviation |
10%-mechanical setting |
| Repeat accuracy |
0.2%-set value stability |
| Temperature coefficient |
0.05%/℃,at=20℃(0.05%℉，at=68℉) |
| Output |
1×SPDT |
2×SPDT |
| Current rating |
16A(AC1) |
| Switching voltage |
250VAC/24VDC |
| Min. breaking capacity DC |
500mW |
| Output indication |
red LED |
| Mechanical life |
1×107 |
| Electrical life(AC1) |
1×105 |
| Reset time |
max.200ms |
| Operating temperature |
-20℃ to+55℃（-4℉to131℉） |
| Storage temperature |
-35℃ to+75℃（-22℉to158℉） |
| Mounting/DIN rail |
Din rail EN/IEC 60715 |
| Protection degree |
IP40 for front panel/IP20 terminals |
| Operating position |
any |
| Overvoltage category |
III. |
| Pollution degree |
2 |
| Max.cable size(mm 2) |
solid wire max.1×2.5or 2×1.5/with sleeve max.1×2.5(AWG 12) |
| Tightening torque |
0.4Nm |
| Dimensions |
90×18×64mm |
| Weight |
1×SPDT:W240-63g,A230-62g |
|
2×SPDT:W240-83g,A230-82g |
| Standards |
EN 61812-1,IEC6947-5-1 |
Previous: Multifunction Time Relay WTT8-M1
Next:
